Teltronics ClearCom12 User Manual

51
Repertory Dialing (Changing Numbers)
To Change a Stored Repertory Dialing
1. Lift the handset and press M
UTE/SAVE.
Hear the confirmation tone.
2. Press a Repertory Dialing button,
such as REP1. Hear a fast busy tone.
To store a new number at that location:
(continuing after step 2)
3. Dial a new number. Include numbers
for an outside line and area code.
4. Press M
UTE/SAVE. Hear the confir-
mation tone, followed by a dial tone.
To erase the current number at that location: (continuing after step 2)
3. Press M
UTE/SAVE without dialing any numbers. Hear the confirmation
tone, followed by a dial tone.
Note:
If you hear a short busy tone after dialing a repertory dialing button, there
is already a number stored at that location. You can enter a new number,
erase the current number (as shown above), or hang up to keep the
current number.
Your System Administrator can set up as many as 8 repertory dialing
buttons for you.
NUM?
NUM? 195125551212
SELECT SAVE FUNCTION
OR PRESS MENU KEY

Teltronics ClearCom12 Specifications

General

Brand	Teltronics
Model	ClearCom12
Category	IP Phone
Language	English