33
Intercom (COM) Calling (Changing
Numbers)
To Change a Stored Intercom (COM) Calling Number Using the COM
button:
1. Press M
UTE/SAVE. Hear the
confirmation tone.
2. Press the COM button. Hear a short
busy tone, indicating a number is
stored.
3. Dial the new extension number.
or
Press a DSS button for the new
extension number, if available.
4. Press M
UTE/SAVE.
To Erase an Intercom (COM) Calling Number:
1. Follow steps 1 and 2 above.
2. Press M
UTE/SAVE.
Note:
You cannot store or change stored COM numbers unless you have a COM
button set up.
To view the current COM button entry, press V
IEW, followed by the COM
button (if set up). Also see “View (Self Status Inquiry)” on page 63.
SELECT SAVE FUNCTION
OR PRESS MENU KEY
NUM?
NUM? 5490
To Next Page
Loading...
Need help?
General