57
Speed Dial (Storing Numbers)
To Store Speed Dial Numbers:
Method 1 - Using a Speed Dial button:
1. Lift the handset and press M
UTE/SAVE.
Hear the confirmation tone.
2. Press the S
PEED DIAL button. Hear the
confirmation tone.
3. Dial a Speed Dial address (00-39).
Hear the confirmation tone.
4. Enter the desired number (up to 20
digits). Include numbers for an outside
line and area code.
5. Press M
UTE SAVE. Hear the
confirmation tone, followed by a dial
tone.
Note:
You can store up to 40 individual speed dial numbers at speed dial
addresses (also known as “indexes”) 00-39. System speed dial numbers
are pre-defined. Use the blank table in the Appendix and/or the Quick
Reference Card to record speed dial numbers.
After dialing a speed dial address, a short busy tone means there is
already a speed dial number at that location. Enter a new number (see the
next topic), or hang up to keep the current number.
SELECT SAVE FUNCTION
OR PRESS MENU KEY
NUM?
SPEED INDEX:
SPEED INDEX: 12
NUM? 915125551212
To Next Page
Loading...
Need help?
General