Teltronics ClearCom12 User Manual

56
Speed Dial (Changing Numbers, cont.)
To Change a Stored Speed Dial Number:
Method 2 - Using Speed Dial Set-Up Access
Code:
1. Lift the handset and dial the Speed Dial
Set-Up
Access Code.
Hear the confirmation tone.
2. Dial a Speed Dial address (00-39).
Hear a short busy tone, followed by
silence.
To change the current number: (continuing after step 2)
3. Dial a new number.
4. Press without dialing any numbers. Hear the confirmation tone,
followed by a dial tone.
To erase the current number: (continuing after step 2)
3. Press without dialing any numbers. Hear the confirmation tone,
followed by a dial tone.
Note:
A short busy tone after dialing a Speed Dial address means there is
already a speed dial number stored at that location. You can replace or
erase this number, as shown above, or hang up to save it.
If you hear a confirmation tone, it means there is no speed dial number
stored at that location.
8741294871234
87412
874
#
#

Teltronics ClearCom12 Specifications

General

Brand	Teltronics
Model	ClearCom12
Category	IP Phone
Language	English