Teltronics ClearCom12 User Manual

52
Repertory Dialing (Storing Numbers)
To Store a Repertory Dialing Number:
1. Lift the handset and press M
UTE/SAVE.
Hear the confirmation tone.
2. Press a Repertory Dialing button, such
as REP1. Hear the confirmation tone.
3. Enter the desired number (up to 20
digits). Include numbers for an outside
line and area code.
4. Press M
UTE/SAVE. Hear the confirmation tone, followed by a dial tone.
Note:
To store repertory dialing numbers, you must have at least one (you can
have as many as 8) repertory dialing button set up by your System
Administrator.
When storing a repertory dialing number, if you hear a short busy tone
after pressing a repertory dialing button, it means there is already a
number stored at that address. Enter a new number, or hang up to keep
the current number.
To display repertory dialing numbers, press V
IEW, followed by a repertory
dialing button.
To change or delete stored repertory dialing numbers, see page 51.
SELECT SAVE FUNCTION
OR PRESS MENU KEY
NUM?
NUM? 917075551212

Teltronics ClearCom12 Specifications

General

Brand	Teltronics
Model	ClearCom12
Category	IP Phone
Language	English