43
To Make an Announcement over the Paging System:
Method 2:
1. Press M
ENU. Hear the confirmation tone.
2. Select 3. Hear the confirmation tone
followed by a dial tone.
3. Dial the Paging code (see the directory
on the previous page). Wait for the page
beep tone.
4. In the silence that follows the page beep tone, make the
announcement.
5. Hang up.
Note:
After dialing the Paging code, a tone indicates the paging system is
available.
If the paging system is in use when you initiate the page, you hear a
ringback tone. Wait off-hook until you hear the paging tone. Then follow
steps 4-5 above.
Up to eight paging zones (with one reserved for All Zone Paging) are
allowed for paging, depending on your telephone system. Check with your
System Administrator for more information.
Record the Paging codes on these pages, in the Appendix, and/or on the
Quick Reference Card.
DIAL ZONE DIGIT:
DIAL 1 FOR ALL ZONES
2-FORWARD
1-PRIVACY
4-REMINDER
3-PAGE
To Next Page
Loading...
Need help?
General