Specifies the encryption mode supported by the Mesh device, including:
−
Not encrypted: Indicates that the Wi-Fi network is not encrypted and any
clients can access the network without a password. This option is not
recommended as it leads to low network security.
−
WPA2-PSK (Recommended): The network is encrypted with WPA2-PSK/AES.
−
WPA3-SAE/WPA2-PSK: The network is encrypted with both WPA3-SAE and
WPA2-PSK, improving both security and compatibility. This option is only
available for some models. Refer to the product you purchased.
WPA3-SAE is the upgraded version of WPA2-PSK. If your WiFi-enabled client does not
support WPA3-SAE, or you get poor WiFi experience, it is recommended to use
WPA2-PSK (Recommended).
Specifies the password for connecting to the Wi-Fi network. You are strongly
recommended to set a Wi-Fi password for security.
It is recommended to use the combination of numbers, uppercase letters, lowercase
letters and special symbols in the password to enhance the security of the Wi-Fi
network.
2.5.2
Separate the 2.4 GHz and 5 GHz Wi-Fi networks
The Mesh device supports both 2.4 GHz and 5 GHz Wi-Fi networks, which are unified and only one
Wi-Fi name is displayed by default.
To separate the Wi-Fi names of the two networks:
Step 1
Log in to the web UI, and choose WiFi Settings.
Step 2
Disable Unify 2.4 GHz & 5 GHz.
Step 3
Set WiFi Name and WiFi Password of each WiFi network
.
In this example, the 2.4 GHz Wi-Fi network is named NOVA_9JK3_A3 and the 5 GHz Wi-Fi
network is named NOVA_9JK3_A3_5G.
Step 4
Click Save.
To Next Page
Loading...
