Tenda MX3 - Disable a Parental Control Rule; Delete a Parental Control Rule

Document version: V1.0
270
4.8.2 Disable a parental control rule
By default, a parental control rule is enabled after you added it successfully, as shown in the
following figure. You can disable it as required.
To disable a parental control rule, log in to the web UI (mobile client), tap Parental Control, and tap
to disable the corresponding rule.
4.8.3 Delete a parental control rule
If you want to delete an unwanted parental control rule, perform the following steps:
Step 1
Log in to the web UI (mobile client), and tap Parental Control.
Step 2
Tap the target rule, and then tap Delete.