Tenda MX3 - More; Guest Wi-Fi

Document version: V1.0
272
4.9 More
4.9.1 Guest Wi-Fi
Overview
In this module, you can enable or disable the guest network function and change the Wi-Fi name
and password of the guest network.
A guest network can be set up with a shared bandwidth limit for visitors to access the internet, and
is isolated from the main network. It protects the security of the main network and ensures the
bandwidth of your main network.
To access the configuration page, log in to the web UI (mobile client) of the Mesh device and
navigate to More > Guest WiFi. This function is disabled by default. The following figure shows the
Guest WiFi page with the Guest WiFi function enabled.
Parameter description
Parameter
Description
Guest WiFi
Used to enable or disable the guest network function.