If the IPv6 network fails, try the following solutions:
- Ensure that you have entered the correct WAN IPv6 address.
-
Ensure that devices connected to Mesh device obtain their IPv6 addresses through
DHCPv6.
-
Consult your ISP for help.
3.6.11
LAN settings
The DHCP server of the Mesh device can assign IP address, subnet mask, default gateway and DNS
server address to clients within the LAN.
Generally, you are not required to change the settings for the DHCP server of the Mesh device,
unless an IP address conflict occurs. For example, if the WAN IP address obtained by the Mesh
device is at the same network segment as its LAN IP address, or the IP address of the client of the
Mesh device is 192.168.5.1.
Configuration procedure:
Step 1
Run the Tenda WiFi App, and choose Settings > LAN Settings.
Step 2
Select a LAN IP address for the Mesh device.
Step 3
Tap Save.
To Next Page
Loading...
