Tenda MX3 - Network Topology

Document version: V1.0
21
No.
Description
3
Indicates the number of available Wi-Fi networks.
4
Indicates the Wi-Fi name and frequency band.
5
Indicates the number of clients connected in the network, including secondary Mesh nodes.
2.3.2 Network topology
To view the basic information of the network topology and perform quick operations:
Step 1
Log in to the web UI.
Step 2
Choose Network Status.
The following page is displayed.
---End
The following table describes the information displayed under Network Topology.
No.
Description
1
Explains the node status indicated by different colors.
−
Green: The node is connected and the networking signal is good.
−
Yellow: The node is connected and the networking signal is fair.
−
Red: The node is connected and the networking signal is poor.
−
Grey: The node is offline.
2
Form a network topology. For details, see Controller information and Agent information.
3
4
Used to Add a node.
5
Used for One-click optimization.