Tenda MX3 - Quick Setup; Connect Your Primary Node to the Internet

Document version: V1.0
214
4.1 Quick setup
4.1.1 Connect your primary node to the internet
A smartphone is used for illustration here.
Configuration procedure:
Step 1
Connect your primary node.
Step 2
Connect your smartphone to the Wi-Fi network of the primary node.
The default Wi-Fi name and password can be found on the bottom label of the device.
Step 3
Start a browser on your smartphone and enter tendawifi.com in the address bar to access
the web UI.
Step 4
Tap Start.
Step 5
Set required parameters (PPPoE is used for illustration here) and tap Next.