Tenda MX3 - Management Type; Local Management; Remote Management

Document version: V1.0
143
3.4 Management type
Mesh devices support local management and remote management with the Tenda WiFi App. You
can choose either of the management types as needed.
3.4.1 Local management
If your nodes are bound to a Tenda account, you can manage them only after logging in to the App
with the administrator account.
Local management indicates that you can use the Tenda WiFi App to manage your Mesh network
after connecting your smartphone to the Wi-Fi network of the Mesh device.
Configuration procedure:
Step 1
Connect your smartphone to the Wi-Fi network of your Mesh device.
Step 2
Run the Tenda WiFi App on the smartphone, and then you can use the App to manage
your Mesh network.
---End
3.4.2 Remote management
Remote management indicates that you can use the Tenda WiFi App to manage your Mesh
network anytime and anywhere without connecting to the WiFi network of the Mesh device.
Prerequisites:
−
Your Mesh nodes are connected to the internet.
−
You have logged in with the administrator account of the Mesh device.
Configuration procedure:
Step 1
Run the Tenda WiFi App on the smartphone.
Step 2
Tap in the upper-left corner.
Step 3
Log in with the administrator account of the Mesh device.
---End
Now, you can manage your Mesh network remotely.