Tenda MX3 - Change a Client Name; Add a Client to the Blacklist

Document version: V1.0
44
2.6.2 Change a client name
You can change the names of all clients connected to the network on the web UI. Here changing
the name of main network client is used as an example. The operations for changing other client
names are similar.
To change the name of a client:
Step 1
Log in to the web UI, and choose Client Management.
Step 2
Click beside the client name.
Step 3
Enter a new name and click .
The new client name is saved.
---End
2.6.3 Add a client to the blacklist
If you find any unknown client connects to your network and you want to block it from accessing
your network, you can blacklist it here. All clients connected to the network can be blacklisted,
except the local host. Here blacklisting a main network client is used as an example. The operations
for blacklisting other clients are similar.
To blacklist a client:
Step 1
Log in to the web UI, and choose Client Management.
Step 2
Click Add to blacklist under Operation in the line of the client to be blacklisted.