4.9.7
Firmware upgrade
For better performance of the new firmware of the Mesh device, you are recommended to reset the
Mesh device to factory settings and re-configure the Mesh device after the upgrade completes.
Upgrade a node
To perform online upgrade on a single node:
Step 1
Log in to the web UI (mobile client), and navigate to More > Firmware Upgrade.
Step 2
Tap Detect Upgrade for a node.
Controller is used for example.
Step 3
Tap Online Upgrade.
Wait until the upgrade completes. Then, access the Firmware Upgrade page again and
check whether the upgrade is successful based on Current Version
.
---End
To Next Page
Loading...
