Tenda MX3 - Static IP Reservation

Document version: V1.0
193
3.6.13 Static IP reservation
Through the Static IP Reservation function, specified clients can always obtain the same IP address
when connecting to the Mesh device, ensuring that the port forwarding or port mapping, DDNS,
DMZ host and other functions are normal. This function takes effect only when the DHCP server
function of the Mesh device is enabled.
Assign static IP addresses to LAN clients
Scenario: You have set up an FTP server within your LAN.
Goal: Assign a fixed IP address to the host of the FTP server and prevent the failure of access to the
FTP server owing to the change of IP address.
Solution: You can configure the DHCP reservation function to reach the goal. Assume that:
−
Fixed IP address for the server: 192.168.0.143
−
MAC address of the FTP server host: C0:9A:D0:5B:28:70
Configuration procedure:
Step 1
Run the Tenda WiFi App, and choose Settings > Advanced > Static IP Reservation.
Step 2
Tap Add Rule.
Step 3
Select the device to which the rule applies, which is iPhone in this example.