Tenda MX3 - Access the Internet through a Dynamic IP Address

Document version: V1.0
244
Step 3
Set Internet Connection Type to PPPoE.
Step 4
Enter the PPPoE Username and PPPoE Password provided by your ISP.
Step 5
Tap Connect.
Wait until the network status changes to Connected, then you can access the internet.
---End
If there is no response from the remote server, troubleshoot as prompted under Network Status on
the Internet Settings page.
4.5.3 Access the internet through a dynamic IP address
Generally, accessing the internet through a dynamic IP address is applicable in the following
situations:
−
Your ISP does not provide the PPPoE user name and password, or any other
information including IP address, subnet mask, default gateway and DNS server.
−
You already have a router with internet access and want to add another router.
The application scenario is shown below.
To access the internet through dynamic IP address:
Step 1
Log in to the web UI (mobile client), and tap Internet Settings.
Smart home gateway