Step 2
Set ISP Type.
If you select Manual for ISP Type, enter Internet VLAN ID and IPTV VLAN ID (if any) provided by your
ISP. Blank VLAN ID indicates that the IPTV function is disabled.
Step 3
Set Internet Connection Type to Static IP.
Step 4
Set IP Address, Subnet Mask, Default gateway and Primary DNS, and Secondary DNS
with the information provided by your ISP.
Step 5
Tap Connect.
Wait until the network status changes to Connected, then you can access the internet.
---End
4.5.5
Set up dual access connection
In countries like Russia, the ISP may require you to set up dual access. One is for access to the
internet through PPPoE, PPTP or L2TP, and the other is for access to the “local” resources where
the ISP is located through DHCP or static IP address. If your ISP provides such connection
information, you can set up dual access to access the internet.
To Next Page
Loading...
