5.4
Forgot my password
Use the following method to troubleshoot the fault.
If you used the same password for Wi-Fi login and web UI login:
−
If you used the default password and forgot it, find it on the bottom label.
(MX15 Pro for example)
−
If you have changed the password, reset the primary node by holding down the reset
(RST/RESET) button with a needle-like item (such as a pin) for about 8 seconds, and
perform settings again.
If you used different passwords for Wi-Fi login and web UI login:
−
The default Wi-Fi password can be found on the bottom label. If you have changed the
password, log in to the web UI, and navigate to Wi-Fi settings to find the password.
−
If you also forgot the web UI login password, reset the primary node by holding down
the reset button with a needle-like item (such as a pin) for about 8 seconds, and
perform settings again.
To Next Page
Loading...
