To configure the power saving mode:
Step 1
Log in to the web UI.
Step 2
Choose More > Smart Power Saving > LED Indicator.
Step 3
Set LED Indicator as required.
−
To turn on all indicators, select Enable.
−
To turn off all indicators all the time, select Disable.
−
To turn off all indicators in a specific period, select Schedule Disable and set Turn Off
at to the required period.
Step 4
Click Save.
The following message is displayed, indicating that the settings are saved successfully.
---End
2.8.8
Advanced Wi-Fi settings
Channel & bandwidth
In this section, you are allowed to change the network mode, Wi-Fi channel, and Wi-Fi bandwidth
of 2.4 GHz and 5 GHz Wi-Fi networks.
To access the configuration page, log in to the web UI of the Mesh device, and choose More > WiFi
Settings > Channel & Bandwidth.
To ensure the wireless performance, it is recommended to maintain the default settings on this page
without professional instructions.
To Next Page
Loading...
