Tenda MX3 - Set up Dual Access Connection

Document version: V1.0
36
Wait until the network status changes to Connected, then you can access the internet.
---End
2.4.5 Set up dual access connection
In countries like Russia, the ISP may require you to set up dual access. One is for access to the
internet through PPPoE, PPTP or L2TP, and the other is for access to the “local” resources where
the ISP is located through DHCP or static IP address. If your ISP provides such connection
information, you can set up dual access to access the internet.
To set up dual access connection:
Step 1
Log in to the web UI, and choose Internet Settings.
Step 2
Set ISP Type to Russia.
Step 3
Set Internet Connection Type, which is Russia PPTP in this example, and fill in required
parameters.