Tenda MX3 - Remove a Client from the Blacklist

Document version: V1.0
45
Step 3
Click OK.
The client is removed from the device list and displayed on the blacklist now.
−
If you blacklist a wired client, the wired client will fail to access the network.
−
If you blacklist a wireless client, the wireless client will be kicked offline and cannot connect to
the Mesh device again.
−
The blacklist rule prevails when conflicting with the parent control rule.
---End
2.6.4 Remove a client from the blacklist
If you blacklist a client by mistake, you can remove it from the blacklist.
To remove a client from the blacklist:
Step 1
Log in to the web UI, and choose Client Management.
Step 2
Choose Blacklist.