Tenda MX3 - Blacklist

Document version: V1.0
175
3.6.6 Blacklist
The blacklist function enables you to add a client into the blacklist or remove a client from the
blacklist. If you find any unknown client connects to your network and you want to block it from
accessing your network, you can blacklist it here. All clients connected to the network can be
blacklisted, except the local host.
Add a client to the blacklist
You can add the client into the blacklist to block the internet access.
Configuration procedure:
Step 1
Run the Tenda WiFi App, and choose Settings > Blacklist.
Step 2
Tap Add to Blacklist or +, and choose Select Client or Manual, which is Select Client in
this example.
Step 3
Select a client that you want to add it into blacklist, then tap Add to Blacklist.
---End
Now the selected client cannot access the internet.