Tenda MX3 - Access the Internet through a Dynamic IP Address

Document version: V1.0
34
---End
If there is no response from the remote server, troubleshoot as prompted under Network Status on
the Internet Settings page.
2.4.3 Access the internet through a dynamic IP address
Generally, accessing the internet through a dynamic IP address is applicable in the following
situations:
−
Your ISP does not provide the PPPoE user name and password, or any other
information including IP address, subnet mask, default gateway and DNS server.
−
You already have a router with internet access and want to add another router.
The application scenario is shown below.
To access the internet through dynamic IP address:
Step 1
Log in to the web UI, and choose Internet Settings.
Step 2
Set ISP Type.
If you select Manual for ISP Type, enter Internet VLAN ID and IPTV VLAN ID (if any) provided by your
ISP. Blank VLAN ID indicates that the IPTV function is disabled.
Step 3
Set Internet Connection Type to Dynamic IP.
Step 4
Click Connect.
Smart home gateway