3.6.12
DHCP server
The Dynamic Host Configuration Protocol (DHCP) is an automatic configuration protocol used on IP
networks. If you enable the built-in DHCP server on this device, the TCP/IP protocol settings will be
automatically configured for all PCs in the LAN, including IP address, subnet mask, gateway, and
DNS.
To set up a DHCP server:
Step 1
Run the Tenda WiFi App, and choose Settings > Advanced > DHCP Server.
Step 2
Enable DHCP Server.
Step 3
Specify the Start IP Address, End IP Address, and LAN IP address.
Step 4
Enable DNS as required and set Primary DNS and Secondary DNS (Optional).
Step 5
Tap Save.
---End
Now a DHCP server is established.
To Next Page
Loading...
