Tenda MX3 - Upnp

Document version: V1.0
205
3.6.19 UPnP
UPnP is short for Universal Plug and Play. This function enables the Mesh device to open port
automatically for UPnP-based programs. It is generally used for P2P programs, such as BitComet
and AnyChat, and helps increase the download speed.
This function is enabled by default.
To enable or disable the UPnP function:
Step 1
Run the Tenda WiFi App, and choose Settings > Advanced > UPnP.
Step 2
Enable or disable the UPnP function as required.
---End