During the 8 hours after the configuration, guests can connect their WiFi-enabled devices,
such as smartphones, to John_Doe or John_Doe_5G to access the internet and enjoy the
shared bandwidth of 8 Mbps.
---End
4.9.2
Smart power saving
You can turn off the LED indicators of all nodes as required to save power. By default, all the
indicators are turned on.
Turn on/off all indicators prevails to this operation.
To configure the power saving mode:
Step 1
Log in to the web UI (mobile client), and navigate to More > LED Indicator.
Step 2
Enable LED Indicator Management.
Step 3
Enable Disable Period. Then, tap the disable period to modify Start Time and End Time,
and tap Save in the upper right corner.
To Next Page
Loading...
