Specify the Wi-Fi name of the Mesh system's guest network. By default, Tenda_VIP is for
the 2.4 GHz Wi-Fi network and Tenda_VIP_5G is for the 5 GHz Wi-Fi network.
You can change the Wi-Fi names (SSIDs) as required. To distinguish the guest network
from the main network, you are recommended to set different Wi-Fi network names.
Specifies the validity period of the guest networks. The guest network function will be
disabled automatically out of the validity period.
Allows you to specify the maximum upload and download speed for all clients connected
to the guest networks. By default, the bandwidth is Unlimited.
An example of configuring the guest network
Scenario: A group of friends are going to visit your home and stay for about 8 hours.
Goal: Prevent the use of Wi-Fi network by guests from affecting the network speed of your
computer for work purposes.
Solution: You can configure the guest network function and let your guests use the guest
networks.
Assume that:
Wi-Fi names for 2.4 GHz and 5 GHz networks: John_Doe and John_Doe_5G.
Wi-Fi password for 2.4 GHz and 5 GHz networks: Tenda+245.
The shared bandwidth for guests: 8 Mbps.
To achieve such a goal:
Step 1
Log in to the web UI (mobile client), and navigate to More > Guest WiFi.
Step 2
Enable Guest WiFi.
Step 3
Set 2.4 GHz WiFi Name, which is John_Doe in this example.
Step 4
Set 5 GHz WiFi Name, which is John_Doe_5G in this example.
Step 5
Set WiFi Password, which is Tenda+245 in this example.
Step 6
Set Validity, which is 8 hours in this example.
Step 7
Set Shared Bandwidth, which is 8 Mbps in this example.
Step 8
Tap Save.
To Next Page
Loading...
