Step 4 Check the diagnosis result and click Optimize to rectify the faults.
---End
2.8.6
TR069
This function is available only for some models. If it is not displayed on your web UI, it is unavailable for
the product that you purchased.
The CPE WAN Management Protocol (TR-069) allows an Auto-Configuration Server (ACS) from the
internet to perform auto-configuration, provision, collection, and diagnostics to the Mesh device.
This function is disabled by default, and you can enable it as required.
To access the configuration page, Log in to the web UI of the router and choose More > TR069.
To Next Page
Loading...
