Tenda MX3 - LED Indicator

Document version: V1.0
177
3.6.7 LED indicator
The LED indicator function enables you to turn on or off the LED indicators of the Mesh devices.
You can also set a schedule to turn off the LED indicators. By default, the LED indicators are turned
on.
Turn on/off all indicators
Step 1
Run the Tenda WiFi App, and choose Settings > LED indicator.
Step 2
Enable/Disable LED Indicator to turn on/off all indicators of Mesh devices.
---End
After the setting completes, the LED indicators of the Mesh devices will turn on/off.