This area displays the information and operation shortcuts of main network clients, including:
−
Client name: You can change the client name by clicking .
−
IP Address: Indicates the IP address of the client.
−
MAC Address: Indicates the MAC address of the client.
−
Uptime: Indicates the network connection time of the client and the networking mode,
such as Wired, 2.4G and 5G.
−
Current Speed: Indicates the real-time upload and download speeds.
−
Negotiation Speed: Indicates the speed of negotiation.
−
Bandwidth Control: Used to set the maximum upload and download speeds, including:
Unlimited: The speed is not limited.
128 KB/s, 256 KB/s: The maximum speed is limited to 128 KB/s or 256 KB/s.
Custom (KB/s): You can set any speed in the range of 1 KB/s to 256000 KB/s.
−
Operation:
Local Host: Indicates that this client is the local host, which is the computer
connected to the primary node in this example. For the local host, no operation is
available here.
Add to blacklist: Used to blacklist a client. Once blacklisted, the client cannot
access the internet through the Mesh system.
This area displays the information and operation shortcuts of clients connected to the guest
network, including:
−
Current Speed: Indicates the real-time upload and download speeds.
−
Negotiation Speed: Indicates the speed of negotiation.
−
Operation: Provides an Add to blacklist button for blacklisting clients. Once blacklisted,
the client cannot access the internet through the Mesh system.
This area displays the information and operation shortcuts of offline clients, including:
−
Client name: You can change the client name by clicking .
−
MAC Address: Indicates the MAC address of the client.
−
Current Speed: Unavailable.
−
Negotiation Speed: Indicates the speed of negotiation.
−
Operation: Provides an Add to blacklist button for blacklisting clients. Once blacklisted,
the client cannot access the internet through the Mesh system.
A maximum of 30 offline clients can be displayed here. A client is displayed under Offline Device
after it is disconnected from the network for 90 seconds (wired client)/60 seconds (wireless
client). A client will be automatically deleted from this list if it is offline for 3 days.
This area displays the information and operation shortcut of blacklisted clients, including:
−
Device Name: Indicates the name of the blacklisted client.
−
MAC Address: Indicates the MAC address of the blacklisted client.
−
Operation: Provides a Remove from the blacklist button for removing clients from the
blacklist.
To Next Page
Loading...
