EasyManua.ls Logo

Tenda MX3 - Page 34

Tenda MX3
305 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document version: V1.0
24
No.
Description
2
This area displays the information and operation shortcuts of main network clients, including:
Client name: You can change the client name by clicking .
IP Address: Indicates the IP address of the client.
MAC Address: Indicates the MAC address of the client.
Uptime: Indicates the network connection time of the client and the networking mode,
such as Wired, 2.4G and 5G.
Current Speed: Indicates the real-time upload and download speeds.
Negotiation Speed: Indicates the speed of negotiation.
Bandwidth Control: Used to set the maximum upload and download speeds, including:
Unlimited: The speed is not limited.
128 KB/s, 256 KB/s: The maximum speed is limited to 128 KB/s or 256 KB/s.
Custom (KB/s): You can set any speed in the range of 1 KB/s to 256000 KB/s.
Operation:
Local Host: Indicates that this client is the local host, which is the computer
connected to the primary node in this example. For the local host, no operation is
available here.
Add to blacklist: Used to blacklist a client. Once blacklisted, the client cannot
access the internet through the Mesh system.
3
This area displays the information and operation shortcuts of offline clients, including:
Client name: You can change the client name by clicking .
MAC address: Indicates the MAC address of the client.
Current Speed: Unavailable.
Negotiation Speed: Displays the speed of negotiation.
Operation: Provides an Add to blacklist button for blacklisting clients. Once blacklisted,
the client cannot access the internet through the Mesh system.
A maximum of 30 offline clients can be displayed here. A client will be automatically deleted from
the list if it is offline for 3 days. A client is displayed under Offline Device after it is disconnected
from the network for 90 seconds (wired client)/60 seconds (wireless client).
Agent information
To view the information about and perform quick operations on the agents (secondary nodes) in
the network:
Step 1
Log in to the web UI.
Step 2
Choose Network Status. Then, click under Network Topology.
The following dialog box is displayed.

Table of Contents

Other manuals for Tenda MX3

Related product manuals