This area displays the information and operation shortcuts of the primary node, including:
−
Node Name: Indicates the name of primary node, which is Controller by default. You can
change the name by clicking beside Primary Node.
−
IP Address: Indicates the IP address of the LAN port of the primary node.
−
MAC Address: Indicates the MAC address of the LAN port of the primary node.
−
Uptime: Indicates the network connection time of the primary node.
−
Ethernet Port Status: Indicates the status of the Ethernet ports of the primary node.
Currently, this parameter is only available for Mesh15XP, MX15 Pro, EX15 Pro,
Mesh21XEP, MX21 Pro and EX21 Pro.
: Indicates that the port is connected and used as a WAN port.
: Indicates that the port is connected and used as a LAN port.
: Indicates that the port is connected and used as an IPTV port.
: Indicates that the port is not connected.
−
Connection Quality: Shows the connection signal strength with the primary node. You
can hover your mouse over to see the strength value. This parameter is only
available for some models. Refer to the product that you purchased.
−
LED On/Off: Provides a button for turning on/off the LED indicator of the
primary node. You can use this function to check which device you are operating. Turn
on/off all indicators prevails to this operation.
−
Operation: Provides a button for rebooting the primary node and a button
for resetting the primary node.
Resetting clears all configurations and restores the device to factory settings. Please operate with
caution.
To Next Page
Loading...
