Access the internet through static IPv6 address
Configuration procedure:
Step 1
Run the Tenda WiFi App, and choose Settings > Advanced > IPv6.
Step 2
Enable the IPv6 function.
Step 3
Set Internet Connection Type to Static IPv6 Address.
Step 4
Enter the required parameters under IPv6 WAN Settings.
Step 5
Tap Save.
---End
Verification:
You can download a network diagnosis App (HE.NET Network Tools for example here) on your
wireless client and ping an IPv6 website (240c::6666 for example) to check whether the Mesh
device accesses the IPv6 network successfully. As shown in the following figure, if the number of
packets received is not 0, the Mesh device accesses the IPv6 network successfully.
To Next Page
Loading...
