Tenda O6 - Page 81

Web UI Functions
-78-
3. Go to the DDNS configuration page and click Regiser. (In case of noip.com or dyndns.com, check the Enable
checkbox of DDNS, select a corresponding service provider, and click Regiser.)
4. Register a domain name by referring to prompt messages in the website.
Assume that registered basic information is as follows:
Service Provider
3322.org
User Name
tenda
Password
tenda
Domain Name
tenda.3322.org
Step 2: Set up a DDNS rule.
1. Re-enter the DDNS page and perform operations by referring to the following contents.
1) DDNS: Click the Enable checkbox to enable this function.
2) Service Provider: Click the dropdown box and select a corresponding DDNS Service Provider (in this
example, 3322.org).
3) User Name and Password: Enter the user name and password registered in the Service Provider website
(in this example, tenda).
4) Domain Name: Enter the domain name created in the Service Provider website (in this example,
tenda.3322.org).
2. Click Save at the bottom of the page.