Tenda TEG3224T - Page 108

24-Port Managed Gigabit Switch
TCP/UDP destination range value. A field for entering a
TCP/UDP destination value appears.
TCP/UDP Destination Number
When "Specific" is selected for the TCP/UDP destination filter,
you can enter a specific TCP/UDP destination value. The
allowed range is 0 to 65535. A frame that hits this ACE
matches this
TCP/UDP destination value.
TCP/UDP Destination Range
When "Range" is selected for the TCP/UDP destination filter,
you can enter a specific TCP/UDP destination range value. The
allowed range is 0 to 65535. A frame that hits this ACE
matches this
TCP/UDP destination value.
TCP FIN
Specify the TCP "No more data from sender" (FIN) value for
this ACE.
0
: TCP frames where the FIN field is set must not be able to
match this entry.
1: TCP frames where the FIN field is set must be able to match
this entry.
Any
: Any value is allowed ("don't-care").
TCP SYN
Specify the TCP "Synchronize sequence numbers" (SYN)
value for this ACE.
0
: TCP frames where the SYN field is set must not be able to
match this entry.
1
: TCP frames where the SYN field is set must be able to
match this entry.
101