24-Port Managed Gigabit Switch
The LED indicators of the TEG3224T contain one Power, one SYS,
26 Link/Act (including 2 SFP indicators) and 24 10/100/1000Mbps
indicators. You can see their operating situation through these LED
indicators.
The following chart shows the LED indicators of the Switch along
with explanation of each indicator.
LED Indicator Status Description
ON Indicates the Switch is powered on well.
POWER
OFF
Indicates the Switch is not powered on well.
Please make sure the power cord’s correct
connection between connector and recepta-
cle.
ON Indicates the Switch is working well.
OFF
Indicates the Switch does not work or works
abnormally.
SYS
Blinking
Indicates the system’s upgrading is in
progress.
ON Indicates the ports are connected well.
OFF
Indicates the port connection is not
established. Please check if the connections
are OK.
Link/Act
Blinking
Indicates the port is transmitting and/or
receiving data packets.
Green Indicates the transmission speed is 1000Mbps.
Orange Indicates the transmission speed is 100Mbps.
Speed
OFF
Indicates the transmission speed is 10Mbps or
there is no connection.
8
To Next Page
Loading...
