Tenda TEG3224T User Manual

24-Port Managed Gigabit Switch
Auto – selects the highest speed that is compatible with a link
partner.
1GbpsFDX – Select the link speed as 1000Mbps Full-duplex.
100MbpsFDX – Select the link speed as 100Mbps Full-duplex.
100M bpsHDX – Select the link speed as 100Mbps
Half-duplex.
10M bpsFDX – Select the link speed as 10Mbps Full-duplex.
10M bpsHDX – Select the link speed as 10Mbps Half-duplex.
Flow Control
When Auto Speed is selected for a port, this section indicates
the flo
w control capability that is advertised to the link partner.
When a fixed-speed setting is selected, that is what is used.
Check the configured column to use flow control; this setting is
related to the setting for Configured Link Speed.
Maximum Frame
Enter the maximum frame size allowed for the switch port,
including FCS. The allowed range is 1518 by
tes to 9600 bytes.
Excessive Collision Mode
Configure port transmit collision behavior.
Discard: Discard frame after 16 collisions (default).
Restart: Restart backoff algorithm after 16 collisions.
22

Tenda TEG3224T Specifications

General

Brand	Tenda
Model	TEG3224T
Category	Switch
Language	English