24-Port Managed Gigabit Switch
Priority
The port priority. This can be used to control priority of ports
having identical port cost. (See above).
Edge
Whether the port is know to connect directly to Edge devices.
(no Bridges attached). The Edge flag is cleared by receipt of
any BPDU's on the port. Edge ports transition faster to
forwarding state. (Physical ports only, aggregations always
Non-Edge).
Point2Point
Whether the port connects to a shared LAN segment or not.
This can be automatically determined, or forced either true or
false. The point-to-point property also affects the speed of
forwarding transitions - non-shared links can transition faster.
(Physical ports only, aggregations always forced
Point2Point).
38
To Next Page
Loading...
Need help?
General
