Tenda TEG3224T User Manual

24-Port Managed Gigabit Switch
Configure the ACL parameters (ACE) of each switch port. These
parameters will affect frames received on a port unless the frame
matches a specific ACE.
Port
The logical port for the settings contained in the same row.
Policy ID
Select the policy to apply to this port. The allowed values are 1
through 8. The default value is 1.
Action
Select whether forwarding is permitted ("Permit") or denied
("Deny"). The default value is "Permit".
Rate Limiter ID
Select which rate limiter to apply to this port. The allowed
values are Disabled or the values 1 through 15. The default
value is "Disabled".
Port Copy
Select which port frames are copied to. The allowed values are
Disabled or a specific port number. The default value is
"Disabled".
Logging
83

Tenda TEG3224T Specifications

General

Brand	Tenda
Model	TEG3224T
Category	Switch
Language	English