August 2021 Service and Repair Manual
Ground Controls
Part No. 1309020GT GS
™
-30m • 32m • 30 • 32 • 46 • 55 29
5 Read and record the IP address.
Note: The display will only show the
IP address for
3 seconds. Press the
scroll up button to display the IP
address for another
3 seconds.
6 Launch a web browser such as Internet
Explorer
®
, Chrome
®
or Firefox
®
on your PC
or laptop. Type the IP address from step
5 into the web browser address bar and press
enter.
Result: The following screen will be displayed.
7 Enter the following username and password
then select OK.
Username: smart.link
Password: SL1000
Note: The username and password are case
sensitive.
Result: The following screen will be displayed.
8 Select the Software tab at the header bar.
Result: The following screen will be displayed.
9 Select the Update Machine Software button.
Result: The following screen will be displayed.
10 Select the Choose File button and navigate
to the downloaded Genie Flash file (.gff).
Note: Verify it is the correct flash file.
To Next Page
Loading...
Need help?
General
