Texas Instruments CC2541 User Manual

Chapter 11
SWRU191C–April 2009– Revised January 2012
Sleep Timer
The Sleep Timer is used to set the period during which the system enters and exits low-power modes
PM1 and PM2. The Sleep Timer is also used to maintain timing in Timer 2 when entering power mode
PM1 or PM2.
The main features of the Sleep Timer are the following:
• 24-bit timer up-counter operating at 32-kHz clock rate
• 24-bit compare with interrupt and DMA trigger
• 24-bit capture
Topic ........................................................................................................................... Page
11.1 General ........................................................................................................... 134
11.2 Timer Compare ................................................................................................ 134
11.3 Timer Capture ................................................................................................. 134
11.4 Sleep Timer Registers ...................................................................................... 135
133
SWRU191C–April 2009–Revised January 2012 Sleep Timer
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated

Texas Instruments CC2541 Specifications

General

Brand	Texas Instruments
Model	CC2541
Category	Microcontrollers
Language	English