14 Getting Started
Changing document settings
1. Press /c16to display the Document Settings dialog box.
2. Press
e to move down through the list of settings. (Press 3 if you
need to move back up through the list.)
3. When you reach the setting that you want to change, press
6 to
expand the selection list.
4. Press the
5 and 6 keys to highlight the option you wish to select
and press
x or · .
5. Press the
4 key until the OK button is highlighted.
6. Press
x or · to apply the new document settings.
Note: If you want to apply the new settings to the device, highlight
Apply to System and press x or ·.
System settings
System settings apply default settings to all documents on the handheld.
When you create a new document, by default, it uses the system settings
to control how the document displays and interprets information.
Document settings applied to an individual document override the
system settings. System settings also control the language and the font
size for the handheld.
Base Decimal
Hex
Binary
Field Values
To Next Page
Loading...
Need help?
General
Weight and Dimensions
