54 Working with Documents
2. Press the 5 and 6 keys on the NavPad to highlight the document you
want to send.
3. Select Send from the My Documents menu.
Press /c15.
4. The file transfer begins. A progress bar displays to allow you to
follow the transfer. There is a cancel button on the Sending... dialog
that allows you to cancel the transmission while it in progress.
When the transfer is complete, a message displays. If the file was
renamed on the receiving handheld, the new file name displays.
Receiving a document
No action is required by the user of the receiving TI-Nspire™ handheld.
Units are automatically powered on when the cable is attached.
Canceling a transfer
1. To cancel a transmission in-progress, press Cancel on the dialog of
the sending unit.
Note: To cancel a transfer from the receiving handheld, press d.
2. A link transmission error message displays.
3. Press
d or · to cancel the transmission error message.
For more information, see the Transferring Files chapter in Part 2 of
this guidebook, available on the CD that came with your handheld,
or on the Texas Instruments web site at
http://education.ti.com/guides.
To Next Page
Loading...
