18 Getting Started
Backing up files to another handheld
To back up files to another TI-Nspire™ handheld, follow the steps below.
Complete instructions for connecting two handhelds are included in the
electronic version of the handheld guidebook, provided on the CD that
came with your handheld.
Connecting two TI-Nspire™handhelds with the USB unit-to-
unit cable
Sending a document
1. Press c7 to open My Documents on the sending unit.
2. Press the 5 and 6 keys to highlight the document you want to send.
3. Press
/c15 to select Send from the Document menu.
4. When the file transfer is complete, a message displays on the
receiving unit.
Connecting a TI-Nspire™ with TI-84 Plus Keypad to a TI-84
Plus handheld
The TI-Nspire™ handheld USB A
port is located at the center of the
top of the handheld.
1. Firmly insert either end of the
USB unit-to-unit cable into
the USB A port.
2. Insert the other end of the
cable into the receiving unit’s
USB A port.
TI-Nspire™ TI-84 Plus keypad I/O link
port is located at the bottom edge of
the keypad. The TI-84 Plus I/O link port
is located at the top left edge of the
graphing calculator.
1. Firmly insert either end of the I/O
unit-to-unit cable into the port.
2. Insert the other end of the cable
into the other graphing calculator’s
I/O port.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
