40 Working with Documents
2. Press e to move down through the list of settings.
Note: Press
geif you need to move back up through the list.
3. When you reach the setting that you want to change, press
6 to
expand the selection list.
4. Press the
5 and 6 keys to highlight the option you wish to select
and press
xor ·.
5. Press
e until the OK button is highlighted.
6. Press
x or · to apply the new document settings.
Note: If you want these settings to apply to future documents also,
highlight
Apply to System and press x.
To Next Page
Loading...
