Regulatory Compliance
Thermo Fisher Scientific performs complete testing and evaluation of its products to ensure full compliance with
applicable domestic and international regulations. When the system is delivered to you, it meets all pertinent
electromagnetic compatibility (EMC) and safety standards as described in the next section or sections by product name.
Changes that you make to your system may void compliance with one or more of these EMC and safety standards.
Changes to your system include replacing a part or adding components, options, or peripherals not specifically
authorized and qualified by Thermo Fisher Scientific. To ensure continued compliance with EMC and safety standards,
replacement parts and additional components, options, and peripherals must be ordered from Thermo Fisher Scientific
or one of its authorized representatives.
Regulatory compliance results for the following Thermo Scientific™ products:
• Orbitrap Fusion Lumos MS
• Orbitrap Fusion MS
Orbitrap Fusion Lumos MS
Low Voltage Directive 2006/95/EC
This device complies with Low Voltage Directive 2006/95/EC and the harmonized safety standard IEC/EN/CSA/
UL 61010-1, 3rd Edition.
EMC Directive 2004/108/EC
This device was tested by TÜV Rheinland of North America and complies with the following EMC standards:
47 CFR 15, Subpart B, Class A: 2015 EN 61000-3-2: 2006 + A1 + A2 EN 61000-4-5: 2006
CISPR 11: 2009 + A1 EN 61000-3-3: 2008 EN 61000-4-6: 2009
ICES-003: 2014 EN 61000-4-2: 2009 EN 61000-4-8: 20103
EN 55011: 2009 + A1 EN 61000-4-3: 2006 + A1 + A2 EN 61000-4-11: 2004
EN 61326-1: 2013 EN 61000-4-4: 2004 + A1
To Next Page
Loading...
Need help?
General
