4-9
4
1 Raise the boom arms, engage the boom supports and
shut off the engine.
2 Remove the seat.
Never work under the boom arms without the boom
supports engaged.
STEERING 4.1
Control Rate Limiter
Adjustment
WARNING
3 Loosen front and rear set collars on right hand control
rod.(fig. C5569, C5522)
4 Pull left hand lever to full forward position and slide
rear set collar forward to touch control rate limiter.
Tighten rear set collar. Release lever to neutral position.
5 Pull right hand lever to full forward position and
slide front set collar back to touch control rate limiter.
Tighten front set collar. Release lever to neutral position.
6 Re-install the seat.
C5569
Rear set
collar
Front set
collar
Control rate
limiter
C5622
Front set
collar
Rear set
collar
Control rate limiter
To Next Page
Loading...
