Thomas 85 - Page 98

3
3-2
SPECIFICATIONS & MAINTENANCE 3.1
Chain Size................................................................... ANSI 60
Approved Chain Manufacturer .................................... Tsubaki
Lubricating Oil .......................... 10W30 API Classification SJ
Oil Capacity (each)........................................ 1.9 gal (7 Liters)
Torque Specifications:
Motor Sprocket Nut.................................. 240 ft lbs (325 Nm)
Wheel Nuts ............................ 100 - 110 ft lbs (135 - 149 Nm)
Tire Pressure................................................... 50 psi (345 kPa)
Specifications
Maintenance Initial Check (hrs) Check Every (hrs)
Tire Pressure......................... 8............................................ 8
Wheel Nut Torque ................ 8 ............................................ 8
Lubrication Oil .................... 50.......................................150 (*)
Chain Tension...................... 50......................................... 150
Motor Mounting Nuts ......... 50......................................... 150
Axle Bearing Pre-load......... 50......................................... 150
(*) Change every 1000 hours.