THOMSON RD1000 - Page 26

Page 26
THOMSON RD1000 / RD1002
Edition 2 – October 2010
Receiver Descrambler - User Manual (release 7.3.1)
Setting the Primary Restore Setting
1. Use the and buttons to move the cursor to the
“Primary Restore” setting, then press the button.
2. Use the and buttons to select “Never”, “When
Primary Rtns” or “On Backup Failure”, then press the
button to save the selection.
Setting the Backup Timeout Setting
1. Use the and buttons to move the cursor to the
“Switchover:” setting, then press the button.
2. Use the and buttons to select the column to edit
and use the and buttons to set the value of the
timeout (3 – 45 seconds), then press the button to
save the selection.
 Backup Mode 
Primary Restore:
Never
►Switchover:05 secs
 Backup Mode 
MPEG/IP 1-3
Primary Restore:
► Never